PH7-pH9 calibration and winterization kit
  • PH7-pH9 calibration and winterization kit
  • PH7-pH9 calibration and winterization kit

PH7-pH9 calibration and winterization kit

5 1
PS-1648
  • PH RedOx wintering solution for probes

50 ml

  • PH7 RedOx solution for probes

50 ml

  • PH9 RedOx solution for probes

50 ml

  • Cap for probe calibration

for pH and chlorine regulator.

12 mm diameter probe input

tightness up to 12 bars

,
5/ 5
€28.10
VAT included
Quantity
In stock

100% secure payments
  FREE SHIPPING

For all order over €54.00

 

Secure card payment by PayPal

  Quality probes

Made in europe

  Technical support

Experts at your service

  Compatible or reimbursed

Our engagement

Description

PH7-pH9 calibration and winterization kit

To correctly calibrate a swimming pool probe, you need: a swimming pool probe, and ... a swimming pool buffer solution which will allow this probe to be calibrated!

Buffer solution for swimming pools: why?

In the world of swimming pools, when we talk about Ť swimming pool buffer solution ť, it means that we have a very specific objective in mind: to calibrate our swimming pool sensor.
Indeed, when you want to measure the salt level, the bromine level, the chlorine level or even the pH of the water with electronic testers (pH-meter, pH regulator, chlorine regulator, etc.) from probe to electrode, for the measurements to be fair and precise, it is imperative to calibrate the probe when the device is put into service, and when the pool is put back into service in the spring.

And to calibrate the probe effectively, it must be immersed in a reference solution, also called a standard solution , or buffer solution ; this maneuver will allow the probe to fix the reference value on which it will always have to be based to evaluate the levels of a particular product in the water.

Buffer solution for swimming pools: how?

When calibrating a swimming pool probe performed on a new device, always start by letting the electrode sit all day in the specific storage solution that was delivered with the electronic tester.

Then, all you have to do is soak the probe in the appropriate buffer solution (pH7, 4 and 9 or 10 buffer solution for pH probes, Redox buffer solution for chlorine redox probes, etc.), wait for the result to be read. stabilizes, and adjust the device as needed.

Note: depending on the nature of our measuring device (simple analysis device or analysis and regulation device) and the results that will be displayed on the box, the progress of the calibration operation may switch.
It is therefore imperative to refer to the instructions for use of our device.

To correctly calibrate a swimming pool probe, you need: a swimming pool probe, and ... a swimming pool buffer solution which will allow this probe to be calibrated!

Buffer solution for swimming pools: why?

In the world of swimming pools, when we talk about Ť swimming pool buffer solution ť, it means that we have a very specific objective in mind: to calibrate our swimming pool sensor.
Indeed, when you want to measure the salt level, the bromine level, the chlorine level or even the pH of the water with electronic testers (pH-meter, pH regulator, chlorine regulator, etc.) from probe to electrode, for the measurements to be fair and precise, it is imperative to calibrate the probe when the device is put into service, and when the pool is put back into service in the spring.

And to calibrate the probe effectively, it must be immersed in a reference solution, also called a standard solution , or buffer solution ; this maneuver will allow the probe to fix the reference value on which it will always have to be based to evaluate the levels of a particular product in the water.

Buffer solution for swimming pools: how?

When calibrating a swimming pool probe performed on a new device, always start by letting the electrode sit all day in the specific storage solution that was delivered with the electronic tester.

Then, all you have to do is soak the probe in the appropriate buffer solution (pH7, 4 and 9 or 10 buffer solution for pH probes, Redox buffer solution for chlorine redox probes, etc.), wait for the result to be read. stabilizes, and adjust the device as needed.

Note: depending on the nature of our measuring device (simple analysis device or analysis and regulation device) and the results that will be displayed on the box, the progress of the calibration operation may switch.
It is therefore imperative to refer to the instructions for use of our device.

Product Details
PS-1648
You might also like

Reference: PS-1637

Brand: Sonde pH redOx

1/2 pH ORP probe holder

Probe holder for pH and ORP regulator. Standard 1/2 'thread for mounting on support collar. Probe input diameter 12 mm tightness up to 12 bars

Price €13.64
More
In stock

Related articles on blog