Hello, I am looking for a probe for a Limpido regulator. This probe must be calibrated at 7.0. Could you tell me the price and know what manipulation I have to do to replace it? THANKS. Mr. Daudigeos

Good morning

Do you have the manual for your limpid?

...No !!

A moment

THE MANUAL

On this site could I have a PH 7.0 probe ???

The pH probe for limpido is: https://ph-redox-pool.com/gb/ccei/56-pH-Probe-for-Limpido-.html

The ph 7 solution: https://ph-redox-pool.com/gb/pool-buffer-calibration-solution/617-ph7-buffer-calibration-solution.html

How to know if it will be calibrated to 7.0. A few months ago I replaced the probe with one that was calibrated 7.4 and of course it does not work!!!!

A sensor cannot be calibrated in advance because it depends on the sensor and the controller. During start-up, the solution must be calibrated with a pH 7 solution according to the manual. to test your probe you can do this test: https://ph-redox-pool.com/gb/content/16-ma-sonde-ph-est-elle-hors-service-

Thank you for this information. I'm going to try to "get out of my way" Have a nice day

If you have a problem, call me. 06 80 01 27 53

Have a good day