. If you have any questions, please let us know.

Hello
The two sensors on altime o need to be changed.
Please let me know which models to choose.
Ref on probe 2016217920 and 2016260506
Cordially

hello, one moment

https://ph-redox-pool.com/gb/altime/432-ph-probe-for-altime-o-touch-ph.html

https://ph-redox-pool.com/gb/altime/443-orp-probe-for-altime-o-touch-redox.html

Thanks.
Isn't there a less expensive model?

Nope,. sorry

Thanks.

You are welcome, do not hesitate to contact us! Have a good evening

A rubber seal is detached from the cap on ph.

On our probe you will install your screw caps in the same way, and it will work

Can you also photograph the connector?

Hello,
So I used an O-ring that I put inside the cap on the seal that I glued to the bottom of the cap.
I screwed everything up and I hope the probe won't come out again.
Do you think that should be enough?
Don't you think that the PH probe should be changed while keeping the other one which holds firmly.
In the case of a change on only one is this possible?
Thank you for your reply.

Hello

Normally if the o-ring is tight that should be enough.