.If you have any questions, please let us know.

. Si vous avez des questions, n 'hésitez pas à nous le faire savoir.

.If you have any questions, please let us know.

Hi. Find a probe for BS Pool Basic

Hi . pH or ORP ?

my old probe can do both, it seems

On your device you read values ​​like 7....

the old probe says H035-BSV01

https://ph-redox-pool.com/gb/bs-pool/468-ph-probe-for-evobasic.html

That is

. If you have any questions, please let us know.

Soorry: https://ph-redox-pool.com/de/bs-pool/468-ph-sonde-für-evobasic.html

This reference is a pH probe. Yours should be blue

yes it is blue

can ph and orp right?

So it's this, it's a pH

can also measure redox

no, the BS controllers that measure the redox have a second redox probe (yellow, red)

unfortunately I don't only have this blue one

Can you take a picture of your probes? I could easily identify her.

The reference you gave me is indeed a redox probe

ph/redox electrode

That's right . a pH probe

No, it's just a pH!

Yes, but I don't have my own probe for redox

You only have one probe?

You only read pH values ​​on your regulator (7, 7.2, ....)

ph value and orp

OK . And you also need the RedoX probe?

2in1. since my probe measures both

If you look at the end of the probe, all you see is a glass bubble! So it's just a pH value. I've been doing it for 10 years!

Also, the BNC connector you have doesn't allow double measurement. Our probes are guaranteed compatible or refundable

yes but additionally if you look at my picture you will see 2 electrical contacts next to the glass bubble

They have a wire, but it's inside the bladder, so it's just a pH probe!

OK

when i unplug the probe on the bs pool basic, the value of ph and orp disappears

So if you should have a second probe

haha, unfortunately I don't have it, so the probe must be able to do both, it seems

You should have two identical connections on your controller.

Do I have

but it is only connected at ph this

nothing is final at redox

I have 2 of these connectors

1 connection is for pH and the second for redox

exactly

but on the second with redox nothing is connected

so one must be connected to the pH probe and the second to the RedoX probe

yes but like i said i only have one probe

and it shows ph and orp

You didn't measure the redox!

And what ORP value do you read?

I don't have my own redox probe

Yes you measured 2 mV, if you connected a redox probe you would measure 500, 600 or 700 mV

I have to go now have a nice day

I'll write again later

Check whether your device measures the pH value and the redox, because there is EVO basic and EVO basic double

Nice day