. If you have any questions, please let us know.

Hello for an isopoolL3 is this probe suitable?

Hello, Yes absolutely.

I have a question my isopool l3 does not trigger the suction to regulate the pH
Can the problem come from the device or the probe?

What pH value are you reading?

7.9

Are you injecting pH minus or pH plus?

Why is the device not firing?
do i have to change it

You must first test the probe like this: https://ph-redox-pool.com/gb/content/16-ma-sonde-ph-est-elle-hors-service-

Ok no worries, why does the device not switch on to adjust the PH with acid, is there a fuse in the device to trigger the suction motor

Not sure . You have a set pH value (usually 7.2/7.3). If the pH value > then the pump starts to add pH minus. Try before unplugging / reconnecting your device, the security may have been triggered. But the value of 7.9 looks like a faulty probe test the probe https://ph-redox-pool.com/gb/content/16-ma-sonde-ph-est-elle-hors-service-

Ok I ordered a new probe, however I lost the little cap that holds the probe, do you sell any?

With the probe that you will receive, the cap is provided

OK thanks a lot

You are welcome, do not hesitate to contact us! Have a good evening