Searching for compatible probes and adapters for the Water Guard WG control 100 system.

Client:
Hello, I have a Water Guard wg control 100 system with reference 0110-643-90 and the redox probe with reference 0111-103-00 is out of service. Do you have a compatible redox probe?
I have a spare pH probe, but the connector is not compatible with the wg control 100. Do you have any adapters?
Here are the photos: the wg control 100 unit, the redox probe, and the connectors.
Image 1
Image 2
Image 3
Image 4
The cable is not defective.
The photos of the connectors are respectively:
Image 5
This is the connector of my spare pH probe which doesn't seem compatible with the connector of the cable coming from the wg control 100.
Thank you Olivier, I will order both the pH and redox probes.

Technical Advisor:
Hello
Send me a photo of your current probe, no need to disassemble it, I will check.
I need to see the connector.
It should be this one Link
It's an SN6 connector, we have it, but on the regulator side, is there another connector or is it connected to a terminal block?
Do you think the cable is defective?
It's without a terminal block.
What length do you need?
Link
This is the probe then
Link
Just connect the probe and it should work.
No, this is a BNC connector.
You need this probe for the pH Link
SN6 connector.
Thank you, have a good evening.