PH Probe Calibration: Demystification and Practical Guide

Client:
Hello, is this PH probe already calibrated?

Technical advisor:
Hello, no, it's not possible, it depends on the probe and the controller.

Client:
I have an XP00 ph controller and I want to replace the probe with your PH-1-3-0524 probe. On other websites, it is indicated that the PH probe is already factory calibrated. What about your probe? Thank you.

Technical advisor:
That's false! Calibration consists of adjusting the device with the probe! They are measured but they need to be calibrated.

Client:
What products are needed to calibrate the probe?

Technical advisor:
One moment, let me check the XP000 manual. PH7. https://ph-redox-pool.com/gb/solution-etalonnage-tampon-piscine/617-solution-d-%C3%A9talonnage-tampon-ph7.html

Client:
Don't we also need another solution: PH10?

Technical advisor:
That's possible if it has been set up with a 2-point calibration. https://ph-redox-pool.com/gb/solution-etalonnage-tampon-piscine/1642-kit-d-%C3%A9talonnage-ph7-ph10.html Yes, by default it's PH7-PH10.

Client:
Thank you.

Technical advisor:
You're welcome, feel free to contact us again! Have a great day.