PH7 calibration kit
    • PH7 calibration kit

    PH7 calibration kit

    5 1
    PS-1643
    • PH 7 calibration / calibration solution for probes

    50 ml

    • Cap for probe calibration

    for pH and chlorine regulator.

    12 mm diameter probe input

    tightness up to 12 bars

    ,
    5/ 5
    Kč357
    VAT included
    Quantity

      Free 96 hour delivery

    For all order over €54.00

     

    Secure card payment

      Quality probes

    Made in europe

      Technical support

    Experts at your service

      Compatible or reimbursed

    Our engagement

    Description

    Buffer solution for swimming pools pH 7 and pH10

    To correctly calibrate a swimming pool probe, you need: a swimming pool probe, and ... a swimming pool buffer solution which will allow this probe to be calibrated!

    Buffer solution for swimming pools: why?

    In the world of swimming pools, when we talk about Ť swimming pool buffer solution ť, it means that we have a very specific objective in mind: to calibrate our swimming pool sensor.
    Indeed, when you want to measure the salt level, the bromine level, the chlorine level or even the pH of the water with electronic testers (pH-meter, pH regulator, chlorine regulator, etc.) from probe to electrode, for the measurements to be fair and precise, it is imperative to calibrate the probe when the device is put into service, and when the pool is put back into service in the spring.

    And to calibrate the probe effectively, it must be immersed in a reference solution, also called a standard solution , or buffer solution ; this maneuver will allow the probe to fix the reference value on which it will always have to be based to evaluate the levels of a particular product in the water.

    Buffer solution for swimming pools: how?

    When calibrating a swimming pool probe performed on a new device, always start by letting the electrode sit all day in the specific storage solution that was delivered with the electronic tester.

    Then, all you have to do is soak the probe in the appropriate buffer solution (pH7, 4 and 9 or 10 buffer solution for pH probes, Redox buffer solution for chlorine redox probes, etc.), wait for the result to be read. stabilizes, and adjust the device as needed.

    Note: depending on the nature of our measuring device (simple analysis device or analysis and regulation device) and the results that will be displayed on the box, the progress of the calibration operation may switch.
    It is therefore imperative to refer to the instructions for use of our device.

    To correctly calibrate a swimming pool probe, you need: a swimming pool probe, and ... a swimming pool buffer solution which will allow this probe to be calibrated!

    Buffer solution for swimming pools: why?

    In the world of swimming pools, when we talk about Ť swimming pool buffer solution ť, it means that we have a very specific objective in mind: to calibrate our swimming pool sensor.
    Indeed, when you want to measure the salt level, the bromine level, the chlorine level or even the pH of the water with electronic testers (pH-meter, pH regulator, chlorine regulator, etc.) from probe to electrode, for the measurements to be fair and precise, it is imperative to calibrate the probe when the device is put into service, and when the pool is put back into service in the spring.

    And to calibrate the probe effectively, it must be immersed in a reference solution, also called a standard solution , or buffer solution ; this maneuver will allow the probe to fix the reference value on which it will always have to be based to evaluate the levels of a particular product in the water.

    Buffer solution for swimming pools: how?

    When calibrating a swimming pool probe performed on a new device, always start by letting the electrode sit all day in the specific storage solution that was delivered with the electronic tester.

    Then, all you have to do is soak the probe in the appropriate buffer solution (pH7, 4 and 9 or 10 buffer solution for pH probes, Redox buffer solution for chlorine redox probes, etc.), wait for the result to be read. stabilizes, and adjust the device as needed.

    Note: depending on the nature of our measuring device (simple analysis device or analysis and regulation device) and the results that will be displayed on the box, the progress of the calibration operation may switch.
    It is therefore imperative to refer to the instructions for use of our device.

    Product Details
    PS-1643
    You might also like

    Reference: PS-1637

    Brand: Sonde pH redOx

    1/2 pH ORP probe holder

    Probe holder for pH and ORP regulator. Standard 1/2 'thread for mounting on support collar. Probe input diameter 12 mm tightness up to 12 bars

    Price Kč464
    More
    In stock